How Much Money Is A Skateboard

Download Commodity

Download Article

Choosing a good skateboard can be tricky, if yous're a beginner in the sport. There'due south a lot that you have to take into account, in addition to the cost. You lot have to also consider the complete board, the deck, the trucks, and the wheels, whether you're ownership a ready-made skateboard or are putting together your own. Once you understand what makes a good skateboard, you'll be hitting up the skate parks in no time.

1. 1

   Decide what you're going to buy. If you desire a good lath for less money, you're going to desire a complete. If you lot want a much improve board for more money, you're going to desire to custom make yours.

   • Keep in heed that choosing custom parts tin actually salve you money. If you're buying on a upkeep, get a Mini Logo or bare deck, cheap all-effectually wheels like Bones 100s, cheap bearings like Spitfire Inexpensive shots or Basic Reds, and any trucks that you can afford.

2. ii

   Decide whether you want a longboard, a classic or a street/vert lath.

   • Longboards can toll from $lx-$500. They're good for bombing hills and riding smoothly, merely they are very hard to do tricks on. They are bang-up for beginners wanting to learn to skate, only you lot won't be able to skate in a skatepark very well.
   • Classics can toll from $60-$400. A archetype, cruiser, or mini cruiser is practiced for cruising, and you tin still do tricks at the skatepark with this i.
   • Street/verts can toll from $70-$200. They're the typical "skateboard", mostly made for tricks but good for a little bit of everything depending on the wheels.

Advert

Buying the Deck Download Article

1. 1

   Consider how much coin you have to spend on a skateboard deck. Blank decks, decks with no graphics on the bottom, commonly run a lot cheaper than pro decks and ride just also. But if you fancy having your favorite pro skateboarder's deck and yous have plenty money, go correct ahead.

2. 2

   Purchase a quality deck. Decks bachelor at your local department shop are usually of low quality and take pictures of cartoon characters on the bottom. If you lot want an unabridged board, but don't know exactly what you want, purchase a complete skateboard from a visitor or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a seven.5 to viii.0 deck, if you want to ride vert, viii.0 and up is probably all-time. However, it's all personal preference. People street skate all the time with decks over 8.0.

   • Keep in mind how tall you lot are when choosing a board width. Also consider the kind of style y'all wish to skate. Most technical skaters (the ones who incorporate advanced flip tricks... like Rodney Mullen) tend to favor boards betwixt 7.5 and 7.75 regardless of how tall or small they happen to be. The upper hand of having a thin lath allows for quick rotation. The other side of the spectrum is the "get big" skaters (Jamie Thomas is a classic example of a "go large" guy). Well-nigh "become big" guys favor size 8.0 and up. The reward of a wide heavy board feels more stable under your feet while in mid air and while landing (especially those who accept large feet). If your a kid y'all might want to just stick with a 7.66 or smaller.
   
   

   Decks (from left to right)	Price in USD	Brand
   SuperLight	$37.50	Mini-Logo
   Silver	$49.95	Powell
   No Ka Oi Longboard	$75.00	Surf-One
   Loma BullDog	$62.00	Powell Peralta
   Street Event	$58.00	Powell Classic
   Quicktail	$100.00	Powell Peralta

Ad

Buying the Trucks Download Article

1. 1

   The trucks are the second near important function of a skateboard. When purchasing a truck, you desire to expect for these characteristics.

   • A length that is no more ten inches (25.4 cm).
   • A width that fits the deck, so vii.5 trucks on a 7.five deck.
   • A design that y'all like.
   • Lightweight.
   • Grinds well.
   • Durable material - You don't want them to snap in half.
   • Pick out a truck that has no design or paint if you are on a tight budget.
   • Design isn't everything - it might look absurd, but that doesn't mean it's good quality.

   Trucks (from left to right)	Cost	Brand
   Unit of measurement Phantom 2 Truck (White)	$17.99	Phantom
   Grind King The Low Truck (Silvery)	$xvi.99	Grind King
   Thunder Creepy Crawl Truck	$16.99	Thunder
   Randal 180	$24.00	Randal
   Tracker 184	$24.95	Tracker Trucks
   Tracker 129	$14.99	Tracker Trucks

Buying the Wheels Download Article

1. ane

   Choice out wheels for the kind of skateboard that yous have and what you generally want to be doing.

   • Long boards apply big and soft wheels.
   • Street boards apply small and hard wheels.
   • It doesn't matter what brands your other parts are. Become the best brand for each individual role depending on what you're doing.
   
   

   Wheel (left to right)	Price (USD)	Brand	Diameter
   S-3 Black	$xvi.80	Mini-Logo	50mm
   Strobe Gold	$32.00	Powell	53mm
   Moving ridge Blackness	$33.00	Surf-One	65mm
   Mini Cubic	$35.95	Powell Peralta	64mm
   Ripper	$32.00	Powell Classic	56mm
   Chiliad-Bones Blue	$32.00	Powell Peralta	64mm

Advertisement

Buying the Bearings Download Article

1. 1

   Bearings are very important if you want to keep rolling without pushing constantly, especially while street skating. They're typically rated with the ABEC (Annular Bearing Technology Committee) scale. The ABEC scale only measures the precision of the begetting, not how well information technology rolls or how long it lasts. Information technology's a common misconception that the ABEC scale refers to how fast the bearing rolls. Anything above 1 is precision and volition perform fine for skateboarding, but information technology's recommended to get to a higher place a 3.

   • The ABEC ratings for skateboard bearings are i, 3, 5, 7, and 9.
   • If yous keep your bearings clean and well lubricated, they'll last for much longer.
   • If you have the money for them, bearings with ceramic balls instead of steel ones will concluding longer and won't need to be lubricated as often. Ceramic assurance as well won't absorb as much estrus equally steel balls, which helps performance when they get hot from friction at high speeds.
   
   

   Bearings	Price in USD	Brand
   Bones Red Bearings	$half-dozen.99 - $18.00	Bones Bearings
   Bones Ceramic Bearings	$48.99 - $140.00	Bones Bearings
   Basic Swiss Labyrinth	$37.99	Bones Bearings
   Bones Original Swiss Bearings	$34.99 - $55.00	Bones Bearings
   Basic Super Swiss Bearings	$39.99 - $58.00	Bones Bearings
   Mini-Logo Bearings	$eight.99	Mini-Logo

Help Picking and Decorating a Lath

Add together New Question

• Question

  Is it necessary to start on a long lath, or tin can I cut out the middle human and begin skating with a regular skateboard?

  

  You can definitely skip the long lath, many people do.

• Question

  I'grand 5'iv and I'm a daughter. What lath size practise you think I should go as a beginner who has never set foot on a skateboard?

  

  I would hit a 7.v board, or somewhere around in that location. Get shoes like vans or antipodal that won't fall apart as soon as you get-go skating, and think about a helmet until you get the hang of riding around.

• Question

  How can I help get my child started if he or she really wants to skateboard?

  

  Try getting one of the kid-sized skateboards. They won't be the best, but they will be plenty to aid your child get some practice. Also, brand certain that yous buy a helmet and some articulatio genus and elbow pads. Think to comfort your kid when he or she falls, and encourage him or her not to requite up.

• Question

  What kind of lath should I go if I'm probably not going to learn tricks?

  

  Become with a long lath. It will give you a nice comfortable ride without having to worry too much nearly balance and droppings. Consider getting a inexpensive board, and then upgrading the bearings to meliorate ones; exist sure to keep them well-lubricated, however.

• Question

  What's the best board for outdoor employ that does non ride slow?

  

  Longboards and penny boards are both pretty fast. The longboards are a little more expensive, heavier, and harder to steer, just a little sturdier than penny boards, it just depends which features are near important to y'all.

• Question

  I'm taller for my historic period, but have never ridden a skateboard before. When size would be the best for me?

  

  Longboards are a peachy place for anyone to kickoff, regardless of height. One time y'all get the hang of it and desire to learn some tricks, you can become a skateboard; choose one co-ordinate to your pes size.

• Question

  How do I find out what board is appropriate for my height and weight?

  

  There's no set size that direct relates to your size, but a narrow board mostly means it will spin easier doing flip tricks, and a wider board is amend for stairs because of more room to country. For a beginner, a 7.five is mostly a good selection.

• Question

  How can I choose a good size lath based on my summit?

  

  Try some and see which one feels comfortable. If your feet are big, so you should try a bigger skateboard, just continue in mind that smaller boards are lighter and easier to flip.

• Question

  I am 5'1 feet tall. What size board should I get?

  

  Meridian doesn't really thing -- shoe size is a more than important gene. You lot would probably want to start around 7.75-8 inches for a street board if you lot're beginning.

• Question

  What board size should a petite, female beginner choose?

  

  You should effort a long board beginning. Learn to balance and button, then move onto a skateboard. Typically, the size of the lath doesn't really matter unless you are going to be performing professionally. By so, you would already know the answer.

See more answers

Ask a Question

200 characters left

Include your email accost to become a message when this question is answered.

Submit

Advertisement

• Before you buy any deck, take it off the shelf and stand up on it to make sure that it is a skilful width and length. Wear the shoes you plan to skate in, so you lot can tell how it will feel.

• Don't buy a board just because it looks cool, get one that has good feel to it.

• The all-time matter to do when getting a new board is to go to your local skate store and talk to the people in that location -- they are usually very helpful. The guys at the shop volition exist able to tell yous what lath will be good for your skating needs. Keep in mind different people have different opinions on board brands. People say Plan B's are good, but I know others that say information technology's not. Some like DGK boards, some don't. Merely test the board out and encounter how it suits you. Yous may want to double bank check this if you are being extremely careful with your selection.

• A few good wheel brands are Spitfire, Ricta, Bones, and Autobahn.

• If you are in it for the tricks, you'll need a skateboard that has a good concave and pop, good trucks, quality bearings, and smooth wheels. If y'all simply want to cruise look into getting a long-board.

• Some skate shops sell bare decks that usually have good pop and volition last a long time. These are too less expensive than make-name boards.

• Earlier you buy a new board, brand sure you are going to skateboard a lot; otherwise it's not worth it to spent $100+ on a setup that yous will not finish up using.

• Buy some grip gum if y'all don't want to mess up your grip tape. They are expensive, at $fourteen or more.

• If y'all desire a corking blueprint on your blank deck, just spray it on. A stencil will work perfectly. If you choose this option it'southward all your style on the deck and yous can make information technology look how you lot desire.

• Grind Male monarch, Independent, Krux, Thunder, and Silvers are probably the best trucks on the market.

• Skating does not require the precision of a motorcar spindle or mill, so you may never need the higher ABEC numbers for your bearings. Some companies, such every bit Bones, do not even rate their bearings. As a full general rule with bearings, you lot get what you pay for, and quality costs money.

• Bones, Flip HKD, Blackness Panther, and Speed Demon are some of the better brand bearings.

• Most decks y'all purchase are going to exist about $50-$seventy. That difference isn't in quality, its in brand and what they sell for. Hi-tech decks usually last longer and are on the more expensive cease but your bones 7-ply will do the aforementioned job. The boilerplate complete will cost grade $140-$200. Endeavour to get the best lath possible if you are a beginner because you lot want it to last a long time.

• If you want to pay a fiddling actress greenbacks for your hardware (bolts) then become for Lucky hardware. Try Shorties if you want it to hold upwardly for a long fourth dimension.

• Some good decks include Flip, Zero, Baker, Nigh, Program B, Girl, Chocolate, Alien Workshop. Any big name brand will work because they are all made pretty much the same.

• If you lot are trying to buy a second board, and yous are getting to the indicate where you lot think, "Practice i desire to exist street or vert?", here is a recommended combination:

  • Deck: Either a Chocolate, Girl, Almost, or Flip. seven.75" (7.75 is the basic size for a combo of street and vert.)
  • Trucks: Purple, Thunder, Contained, or Grind King. seven.75"
  • Bearings: FKD, Chemical element, or Destructo. ABEC 7. ABEC is a rating for the accurateness of the cut of the bearing. 3 is the everyman, 9 is the highest. Go for 7 for a combo of street and vert.
  • Wheels: Whatever 52mm-54mm of any brand. Endeavour 97 hardness so bumps and pebbles in the road aren't felt to strongly.
  • Hardware: Shorties of any kind. Theirs holds upwardly the all-time.
  • Griptape: Any that yous like. Avoid colored grip tape considering it picks up clay and starts to look ratty and terrible over fourth dimension.

• A great deck combo if you lot desire to street cruise (only don't want a longboard) is:

  • Deck: Whatsoever Powell-Peralta lath (erstwhile-school style) preferably 10 past nearly 30 inches (76.two cm). Yous can become those at powell-peralta.com.
  • Trucks: 9.5 inch (169mm) Independent trucks.
  • Wheels: 90a or 85a Rat Bones wheels. For a street cruiser, you don't want hard small-scale wheels (hard is about 92a and up, small wheels are under 60mm). Soft wheels don't trip up on cracks, and ninety/85a wheels are still dense enough to go fast.
  • Bearings: any Bones bearings, just go Reds if you don't have a lot of money.
  • Griptape: MOB IS TIGHT!

• If unsure near board size get 8.0 and conform to your needs from in that location. Recall, smaller boards flip ameliorate but larger boards are easier to state on and are more comfy to ride on.

Cheers for submitting a tip for review!

Advert

• Skateboarding takes time and lots of do. Don't practise whatever extreme flim-flam like Hardflips or 360 Front Flips until you learn the basics: The Ollie, Kickflip, 10 sec Manual, Boardslide and Heelflip.

• Don't get into skateboarding if y'all don't want to spend the time, or the money. You volition usually go through a board every five or half-dozen months and if y'all don't want to go through that, find another sport.

• Effort to wear long pants, because your ankles are going to get beat up if you practise spin tricks with shorts on.

• Don't e'er get out the trick if you tin can't do it.

• Do Non betrayal your board to elements such as water or farthermost oestrus. The lath volition starting time to separate and y'all will be out a board.

• Retail lath bearings are the worst bearings in the globe and can come off easily in a few weeks even afterwards tightening them to the hardest. Its cheaper but if you wanna become a professional skater you gotta get a pro board.

• Boards bought at any retail store are really bad and are not good for skating and are called poser boards by dedicated skaters. The best identify to get a adept board is your local Skate Shop. The Second best identify to buy a board is a chain shop like Zumiez or Vans. As well BlackHoleBoards has every make you lot proper noun.

• Skateboarding is a dangerous sport. Especially if you lot're going to be trying crazy tricks and gaps, a helmet is recommended to avoid brain damage, and pads are recommended if yous want to take elbows and knees when you are through.

• Retrieve don't get those cheap skateboards from Walmart. They won't hold up to whatsoever skating and tin break from a single ollie that is landed improperly, only 2 cheap boards a week for a few weeks adds upwards to the price of 2 or three expensive boards. These boards are also heavier and slow which makes them much more difficult to practice tricks on.

• Call back, no skateboard lasts forever. Each board has different lifespan, regardless of the make. Flip tends to break the easiest if you skate a lot. Nigh and Girl boards usually have the longest life span. If you desire a board that lasts really longer and y'all take the money, get for the Uber boards. Almost has three Uber boards signed by Mullen and commonly start at $70 only for the deck, and completes range from $150-$250 just for the basic. If you want the perfect board, then yous are talking a lot of money.

  • Uber boards are pro boards, so if yous are beginner do non become one until y'all take been skating at least one year and you got the feel of a regular pro board. Uber boards are actually 2 boards within another board, so information technology'south whole lot smoother, and you will demand to residue!

Advertizing

Things You'll Need

• Skate Shoes - Vans, Globes, DC, Etnies, Fallen
• Helmet
• Local Skate Shop
• Local skate park or street
• Skateboard
• Pads
• Budgets
• Offset aid kit
• Crew
• Grip Gloves (optional)

Near This Article

Article Summary X

If you lot want to choose a good skateboard, consider getting a board with customized parts. For the deck, opt for a width of 7.5 to 8.0 if yous desire to ride on the streets and wider if you lot plan on riding vert. While the price range for decks is wide, you tin save some coin by buying a blank deck rather than one designed by a pro skateboarder. When choosing trucks for your board, look for a length that is no more than than 10 inches and a width that matches the size of your deck. To go your skateboard rolling smoothly, selection out wheels that match your way. For longboards, become with big and soft wheels and for street boards, pick wheels that are modest and difficult. When picking out bearings, annihilation in a higher place a 3 on the ABEC scale volition work best. For more help, including how to decorate your new skateboard, read on!

Did this summary help y'all?

Thanks to all authors for creating a folio that has been read 981,049 times.

Did this article assistance you?

Source: https://www.wikihow.com/Choose-a-Good-Skateboard

Posted by: weaveracrod1984.blogspot.com

Share this post